ꦫꦣꦺꦤ꧀ꦄꦤ꧀ꦠꦱꦺꦤ

PATH: usr / lib / udev / rules.d

# do not edit this file, it will be overwritten on update

# CPU hotadd request
SUBSYSTEM=="cpu", ACTION=="add", TEST=="online", ATTR{online}=="0", ATTR{online}="1"

# Memory hotadd request
SUBSYSTEM!="memory", GOTO="memory_hotplug_end"
ACTION!="add", GOTO="memory_hotplug_end"
CONST{arch}=="s390*", GOTO="memory_hotplug_end"

ENV{.state}="online"
CONST{virt}=="none", ENV{.state}="online_movable"
ATTR{state}=="offline", ATTR{state}="$env{.state}"

LABEL="memory_hotplug_end"

# reload sysctl.conf / sysctl.conf.d settings when the bridge module is loaded
ACTION=="add", SUBSYSTEM=="module", KERNEL=="bridge", RUN+="/usr/lib/systemd/systemd-sysctl --prefix=/proc/sys/net/bridge"

# load SCSI generic (sg) driver
SUBSYSTEM=="scsi", ENV{DEVTYPE}=="scsi_device", TEST!="[module/sg]", RUN+="/sbin/modprobe -bv sg"
SUBSYSTEM=="scsi", ENV{DEVTYPE}=="scsi_target", TEST!="[module/sg]", RUN+="/sbin/modprobe -bv sg"

# Rule for prandom character device node permissions
KERNEL=="prandom", MODE="0644"

# Rules for creating the ID_PATH for SCSI devices based on the CCW bus
# using the form: ccw-<BUS_ID>-zfcp-<WWPN>:<LUN>
#
ACTION=="remove", GOTO="zfcp_scsi_device_end"

#
# Set environment variable "ID_ZFCP_BUS" to "1" if the devices
# (both disk and partition) are SCSI devices based on FCP devices
#
KERNEL=="sd*", SUBSYSTEMS=="ccw", DRIVERS=="zfcp", ENV{.ID_ZFCP_BUS}="1"

# For SCSI disks
KERNEL=="sd*[!0-9]", SUBSYSTEMS=="scsi", ENV{.ID_ZFCP_BUS}=="1", ENV{DEVTYPE}=="disk", SYMLINK+="disk/by-path/ccw-$attr{hba_id}-zfcp-$attr{wwpn}:$attr{fcp_lun}"

# For partitions on a SCSI disk
KERNEL=="sd*[0-9]", SUBSYSTEMS=="scsi", ENV{.ID_ZFCP_BUS}=="1", ENV{DEVTYPE}=="partition", SYMLINK+="disk/by-path/ccw-$attr{hba_id}-zfcp-$attr{wwpn}:$attr{fcp_lun}-part%n"

LABEL="zfcp_scsi_device_end"

[-] 84-nm-drivers.rules [edit]
[-] 76-phys-port-name.rules [edit]
[-] 60-evdev.rules [edit]
[-] 90-iprutils.rules [edit]
[-] 60-drm.rules [edit]
[-] 13-dm-disk.rules [edit]
[-] 73-seat-late.rules [edit]
[-] 60-persistent-serial.rules [edit]
[+] ..
[-] 90-nm-thunderbolt.rules [edit]
[-] 61-accelerometer.rules [edit]
[-] 80-net-setup-link.rules [edit]
[-] 78-sound-card.rules [edit]
[-] 64-btrfs-dm.rules [edit]
[-] 81-kvm-rhel.rules [edit]
[-] 75-net-description.rules [edit]
[-] 99-systemd.rules [edit]
[-] 73-idrac.rules [edit]
[-] 60-cdrom_id.rules [edit]
[-] 63-fc-wwpn-id.rules [edit]
[-] 95-dm-notify.rules [edit]
[-] 60-keyboard.rules [edit]
[-] 40-redhat.rules [edit]
[-] 90-vconsole.rules [edit]
[-] 99-qemu-guest-agent.rules [edit]
[-] 85-nm-unmanaged.rules [edit]
[-] 40-redhat-disable-dell-ir-camera.rules [edit]
[-] 75-probe_mtd.rules [edit]
[-] 60-persistent-storage.rules [edit]
[-] 42-usb-hid-pm.rules [edit]
[-] 75-tty-description.rules [edit]
[-] 91-drm-modeset.rules [edit]
[-] 80-net-name-slot.rules [edit]
[-] 60-net.rules [edit]
[-] 70-mouse.rules [edit]
[-] 90-alsa-tools-firmware.rules [edit]
[-] 95-udev-late.rules [edit]
[-] 40-redhat-disable-lenovo-ir-camera.rules [edit]
[-] 60-alias-kmsg.rules [edit]
[-] 71-biosdevname.rules [edit]
[-] 10-dm.rules [edit]
[-] 98-kexec.rules [edit]
[-] 60-persistent-alsa.rules [edit]
[-] 60-raw.rules [edit]
[-] 70-uaccess.rules [edit]
[-] 60-persistent-input.rules [edit]
[-] 71-seat.rules [edit]
[-] 50-udev-default.rules [edit]
[-] 60-persistent-storage-tape.rules [edit]
[-] 70-touchpad.rules [edit]
[-] 80-drivers.rules [edit]
[-] 70-power-switch.rules [edit]
[-] 64-btrfs.rules [edit]
[-] 60-persistent-v4l.rules [edit]