ꦫꦣꦺꦤ꧀ꦄꦤ꧀ꦠꦱꦺꦤ

PATH: usr / share / doc / libc-client-2007f

/* ========================================================================
 * Copyright 1988-2006 University of Washington
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * 
 * ========================================================================
 */

Mailbox Name Conventions
			     Mark Crispin
			    5 October 2005

Please refer to the file drivers.txt for related information.

I. Special names

Special names appear by themselves.

I.a. INBOX

The name INBOX is special and refers to primary incoming message
mailbox on the local system.

I.b. #mhinbox (UNIX only)

The name #mhinbox is special and refers to the primary incoming mh
format mailbox on the local system.  Don't worry about this if you
don't know what mh format is.

II.  Special prefixes

All names which start with a "#" have a "special prefix" which
identifies an alternative namespace.  Special prefixes appear in front
of some additional text which constitutes a suffix.

II.a. #mh/ (UNIX only)

The prefix #mh/ is special and refers to the mh format mailbox named
with the suffix.  For example, #mh/foo refers to the mh format mailbox
named foo.  Don't worry about this if you don't know what mh format is.

II.b. #news. (UNIX only)

The prefix #news. is special and refers to the newsgroup named with
the suffix.  For example, #news.comp.mail.misc refers to the newsgroup
named comp.mail.misc.

II.c. #ftp/ (UNIX only)

The prefix #ftp/ is special and refers to the anonymous ftp filesystem
named with the suffix.  For example, #ftp/foo/bar refers to the file
/foo/bar in the anonymous FTP filesystem.  Anonymous FTP files are
available to anonymous IMAP logins.

II.d. #public/ (UNIX only)

The prefix #public/ is special and refers to the public files
filesystem named with the suffix.  For example, #public/foo/bar refers
to the file /foo/bar in the public filesystem.  Public files are
available to anonymous IMAP logins.

II.e. #shared/ (UNIX only)

The prefix #shared/ is special and refers to the shared files
filesystem named with the suffix.  For example, #shared/foo/bar
frefers to the file /foo/bar in the shared filesystem.

III. Remote names

All names which start with "{" are remote names, and are in the form
	"{" remote_system_name [":" port] [flags] "}" [mailbox_name]
where:
 remote_system_name	Internet domain name or bracketed IP address
			 of server.
 port			optional TCP port number, default is the
			 default port for that service		
 flags			optional flags, one of the following:
  "/service=" service	mailbox access service, default is "imap"
  "/user=" user		remote user name for login on the server
  "/authuser=" user	remote authentication user; if specified this
			 is the user name whose password is used (e.g.
			 administrator)
  "/anonymous"		remote access as anonymous user
  "/debug"		record protocol telemetry in application's
			 debug log
  "/secure"		do not transmit a plaintext password over
			 the network
  "/imap", "/imap2", "/imap2bis", "/imap4", "/imap4rev1"
			equivalent to /service=imap
  "/pop3"		equivalent to /service=pop3
  "/nntp"		equivalent to /service=nntp
  "/norsh"		do not use rsh or ssh to establish a preauthenticated
			 IMAP session
  "/ssl"		use the Secure Socket Layer to encrypt the session
  "/validate-cert"	validate certificates from TLS/SSL server (this is the
			 default behavior)
  "/novalidate-cert"	do not validate certificates from TLS/SSL server,
			 needed if server uses self-signed certificates
  "/tls"		force use of start-TLS to encrypt the session, and
			 reject connection to servers that do not support it
  "/tls-sslv23"		use the depreciated SSLv23 client when negotiating
			 TLS to the server.  This is necessary with some
			 broken servers which (incorrectly) think that TLS
			 is just another way of doing SSL.
  "/notls"		do not do start-TLS to encrypt the session, even
			 with servers that support it
  "/readonly"		request read-only mailbox open (IMAP only; ignored
			 on NNTP, and an error with SMTP and POP3)
  "/loser"		disable various protocol features and perform various
			 client-side workarounds; for example, it disables
			 the SEARCH command in IMAP and does client-side
			 searching instead.  The precise measures taken by
			 /loser depend upon the protocol and are subject to
			 change over time.  /loser is intended for use with
			 defective servers which do not implement the
			 protocol specification correctly.  It should be used
			 only as a last resort since it will seriously
			 degrade performance.
 mailbox_name		remote mailbox name, default is INBOX

For example:
	{imap.foo.com}INBOX
opens an IMAP connection to system imap.foo.com and selects INBOX.

IV. All other names

All other names are treated as local file names, relative to the
user's home directory.  Read drivers.txt for more details.

[-] md5.txt [edit]
[+] ..
[-] LICENSE.txt [edit]
[-] locking.txt [edit]
[-] calendar.txt [edit]
[-] formats.txt [edit]
[-] SUPPORT [edit]
[-] IPv6.txt [edit]
[-] mixfmt.txt [edit]
[-] drivers.txt [edit]
[-] FAQ.txt [edit]
[-] NOTICE [edit]
[-] imaprc.txt [edit]
[-] internal.txt [edit]
[-] naming.txt [edit]
[-] commndmt.txt [edit]
[-] bugs.txt [edit]
[-] RELNOTES [edit]