ꦫꦣꦺꦤ꧀ꦄꦤ꧀ꦠꦱꦺꦤ

PATH: usr / bin

#!/usr/bin/perl
    eval 'exec /usr/bin/perl -S $0 ${1+"$@"}'
	if $running_under_some_shell;

=head1 NAME

diagnostics, splain - produce verbose warning diagnostics

=head1 SYNOPSIS

Using the C<diagnostics> pragma:

use diagnostics;
    use diagnostics -verbose;

enable  diagnostics;
    disable diagnostics;

Using the C<splain> standalone filter program:

perl program 2>diag.out
    splain [-v] [-p] diag.out

Using diagnostics to get stack traces from a misbehaving script:

perl -Mdiagnostics=-traceonly my_script.pl

=head1 DESCRIPTION

=head2 The C<diagnostics> Pragma

This module extends the terse diagnostics normally emitted by both the
perl compiler and the perl interpreter (from running perl with a -w 
switch or C<use warnings>), augmenting them with the more
explicative and endearing descriptions found in L<perldiag>.  Like the
other pragmata, it affects the compilation phase of your program rather
than merely the execution phase.

To use in your program as a pragma, merely invoke

use diagnostics;

at the start (or near the start) of your program.  (Note 
that this I<does> enable perl's B<-w> flag.)  Your whole
compilation will then be subject(ed :-) to the enhanced diagnostics.
These still go out B<STDERR>.

Due to the interaction between runtime and compiletime issues,
and because it's probably not a very good idea anyway,
you may not use C<no diagnostics> to turn them off at compiletime.
However, you may control their behaviour at runtime using the 
disable() and enable() methods to turn them off and on respectively.

The B<-verbose> flag first prints out the L<perldiag> introduction before
any other diagnostics.  The $diagnostics::PRETTY variable can generate nicer
escape sequences for pagers.

Warnings dispatched from perl itself (or more accurately, those that match
descriptions found in L<perldiag>) are only displayed once (no duplicate
descriptions).  User code generated warnings a la warn() are unaffected,
allowing duplicate user messages to be displayed.

This module also adds a stack trace to the error message when perl dies.
This is useful for pinpointing what
caused the death.  The B<-traceonly> (or
just B<-t>) flag turns off the explanations of warning messages leaving just
the stack traces.  So if your script is dieing, run it again with

perl -Mdiagnostics=-traceonly my_bad_script

to see the call stack at the time of death.  By supplying the B<-warntrace>
(or just B<-w>) flag, any warnings emitted will also come with a stack
trace.

=head2 The I<splain> Program

While apparently a whole nuther program, I<splain> is actually nothing
more than a link to the (executable) F<diagnostics.pm> module, as well as
a link to the F<diagnostics.pod> documentation.  The B<-v> flag is like
the C<use diagnostics -verbose> directive.
The B<-p> flag is like the
$diagnostics::PRETTY variable.  Since you're post-processing with 
I<splain>, there's no sense in being able to enable() or disable() processing.

Output from I<splain> is directed to B<STDOUT>, unlike the pragma.

=head1 EXAMPLES

The following file is certain to trigger a few errors at both
runtime and compiletime:

use diagnostics;
    print NOWHERE "nothing\n";
    print STDERR "\n\tThis message should be unadorned.\n";
    warn "\tThis is a user warning";
    print "\nDIAGNOSTIC TESTER: Please enter a <CR> here: ";
    my $a, $b = scalar <STDIN>;
    print "\n";
    print $x/$y;

If you prefer to run your program first and look at its problem
afterwards, do this:

perl -w test.pl 2>test.out
    ./splain < test.out

Note that this is not in general possible in shells of more dubious heritage, 
as the theoretical

(perl -w test.pl >/dev/tty) >& test.out
    ./splain < test.out

Because you just moved the existing B<stdout> to somewhere else.

If you don't want to modify your source code, but still have on-the-fly
warnings, do this:

exec 3>&1; perl -w test.pl 2>&1 1>&3 3>&- | splain 1>&2 3>&-

Nifty, eh?

If you want to control warnings on the fly, do something like this.
Make sure you do the C<use> first, or you won't be able to get
at the enable() or disable() methods.

use diagnostics; # checks entire compilation phase 
	print "\ntime for 1st bogus diags: SQUAWKINGS\n";
	print BOGUS1 'nada';
	print "done with 1st bogus\n";

disable diagnostics; # only turns off runtime warnings
	print "\ntime for 2nd bogus: (squelched)\n";
	print BOGUS2 'nada';
	print "done with 2nd bogus\n";

enable diagnostics; # turns back on runtime warnings
	print "\ntime for 3rd bogus: SQUAWKINGS\n";
	print BOGUS3 'nada';
	print "done with 3rd bogus\n";

disable diagnostics;
	print "\ntime for 4th bogus: (squelched)\n";
	print BOGUS4 'nada';
	print "done with 4th bogus\n";

=head1 INTERNALS

Diagnostic messages derive from the F<perldiag.pod> file when available at
runtime.  Otherwise, they may be embedded in the file itself when the
splain package is built.   See the F<Makefile> for details.

If an extant $SIG{__WARN__} handler is discovered, it will continue
to be honored, but only after the diagnostics::splainthis() function 
(the module's $SIG{__WARN__} interceptor) has had its way with your
warnings.

There is a $diagnostics::DEBUG variable you may set if you're desperately
curious what sorts of things are being intercepted.

BEGIN { $diagnostics::DEBUG = 1 }

=head1 BUGS

Not being able to say "no diagnostics" is annoying, but may not be
insurmountable.

The C<-pretty> directive is called too late to affect matters.
You have to do this instead, and I<before> you load the module.

BEGIN { $diagnostics::PRETTY = 1 }

I could start up faster by delaying compilation until it should be
needed, but this gets a "panic: top_level" when using the pragma form
in Perl 5.001e.

While it's true that this documentation is somewhat subserious, if you use
a program named I<splain>, you should expect a bit of whimsy.

=head1 AUTHOR

Tom Christiansen <F<tchrist@mox.perl.com>>, 25 June 1995.

=cut

use strict;
use 5.009001;
use Carp;
$Carp::Internal{__PACKAGE__.""}++;

our $VERSION = '1.28';
our $DEBUG;
our $VERBOSE;
our $PRETTY;
our $TRACEONLY = 0;
our $WARNTRACE = 0;

use Config;
my $privlib = $Config{privlibexp};
if ($^O eq 'VMS') {
    require VMS::Filespec;
    $privlib = VMS::Filespec::unixify($privlib);
}
my @trypod = (
	   "$privlib/pod/perldiag.pod",
	   "$privlib/pods/perldiag.pod",
	  );
# handy for development testing of new warnings etc
unshift @trypod, "./pod/perldiag.pod" if -e "pod/perldiag.pod";
(my $PODFILE) = ((grep { -e } @trypod), $trypod[$#trypod])[0];

$DEBUG ||= 0;
my $WHOAMI = ref bless [];  # nobody's business, prolly not even mine

local $| = 1;
local $_;
local $.;

my $standalone;
my(%HTML_2_Troff, %HTML_2_Latin_1, %HTML_2_ASCII_7);

CONFIG: {
    our $opt_p = our $opt_d = our $opt_v = our $opt_f = '';

unless (caller) {
	$standalone++;
	require Getopt::Std;
	Getopt::Std::getopts('pdvf:')
	    or die "Usage: $0 [-v] [-p] [-f splainpod]";
	$PODFILE = $opt_f if $opt_f;
	$DEBUG = 2 if $opt_d;
	$VERBOSE = $opt_v;
	$PRETTY = $opt_p;
    }

if (open(POD_DIAG, $PODFILE)) {
	warn "Happy happy podfile from real $PODFILE\n" if $DEBUG;
	last CONFIG;
    }

if (caller) {
	INCPATH: {
	    for my $file ( (map { "$_/$WHOAMI.pm" } @INC), $0) {
		warn "Checking $file\n" if $DEBUG;
		if (open(POD_DIAG, $file)) {
		    while (<POD_DIAG>) {
			next unless
			    /^__END__\s*# wish diag dbase were more accessible/;
			print STDERR "podfile is $file\n" if $DEBUG;
			last INCPATH;
		    }
		}
	    } 
	}
    } else { 
	print STDERR "podfile is <DATA>\n" if $DEBUG;
	*POD_DIAG = *main::DATA;
    }
}
if (eof(POD_DIAG)) { 
    die "couldn't find diagnostic data in $PODFILE @INC $0";
}

%HTML_2_Troff = (
    'amp'	=>	'&',	#   ampersand
    'lt'	=>	'<',	#   left chevron, less-than
    'gt'	=>	'>',	#   right chevron, greater-than
    'quot'	=>	'"',	#   double quote

"Aacute"	=>	"A\\*'",	#   capital A, acute accent
    # etc

);

%HTML_2_Latin_1 = (
    'amp'	=>	'&',	#   ampersand
    'lt'	=>	'<',	#   left chevron, less-than
    'gt'	=>	'>',	#   right chevron, greater-than
    'quot'	=>	'"',	#   double quote

"Aacute"	=>	"\xC1"	#   capital A, acute accent

# etc
);

%HTML_2_ASCII_7 = (
    'amp'	=>	'&',	#   ampersand
    'lt'	=>	'<',	#   left chevron, less-than
    'gt'	=>	'>',	#   right chevron, greater-than
    'quot'	=>	'"',	#   double quote

"Aacute"	=>	"A"	#   capital A, acute accent
    # etc
);

our %HTML_Escapes;
*HTML_Escapes = do {
    if ($standalone) {
	$PRETTY ? \%HTML_2_Latin_1 : \%HTML_2_ASCII_7; 
    } else {
	\%HTML_2_Latin_1; 
    }
};

*THITHER = $standalone ? *STDOUT : *STDERR;

my %transfmt = (); 
my $transmo = <<EOFUNC;
sub transmo {
    #local \$^W = 0;  # recursive warnings we do NOT need!
EOFUNC

my %msg;
{
    print STDERR "FINISHING COMPILATION for $_\n" if $DEBUG;
    local $/ = '';
    local $_;
    my $header;
    my @headers;
    my $for_item;
    my $seen_body;
    while (<POD_DIAG>) {

sub _split_pod_link {
	    $_[0] =~ '(?:([^|]*)\|)?([^/]*)(?:/("?)(.*)\3)?';
	    ($1,$2,$4);
	}

unescape();
	if ($PRETTY) {
	    sub noop   { return $_[0] }  # spensive for a noop
	    sub bold   { my $str =$_[0];  $str =~ s/(.)/$1\b$1/g; return $str; } 
	    sub italic { my $str = $_[0]; $str =~ s/(.)/_\b$1/g;  return $str; } 
	    s/C<<< (.*?) >>>|C<< (.*?) >>|[BC]<(.*?)>/bold($+)/ges;
	    s/[IF]<(.*?)>/italic($1)/ges;
	    s/L<(.*?)>/
	       my($text,$page,$sect) = _split_pod_link($1);
	       defined $text
	        ? $text
	        : defined $sect
	           ? italic($sect) . ' in ' . italic($page)
	           : italic($page)
	     /ges;
	     s/S<(.*?)>/
               $1
             /ges;
	} else {
	    s/C<<< (.*?) >>>|C<< (.*?) >>|[BC]<(.*?)>/$+/gs;
	    s/[IF]<(.*?)>/$1/gs;
	    s/L<(.*?)>/
	       my($text,$page,$sect) = _split_pod_link($1);
	       defined $text
	        ? $text
	        : defined $sect
	           ? qq '"$sect" in $page'
	           : $page
	     /ges;
	    s/S<(.*?)>/
               $1
             /ges;
	} 
	unless (/^=/) {
	    if (defined $header) { 
		if ( $header eq 'DESCRIPTION' && 
		    (   /Optional warnings are enabled/ 
		     || /Some of these messages are generic./
		    ) )
		{
		    next;
		}
		s/^/    /gm;
		$msg{$header} .= $_;
		for my $h(@headers) { $msg{$h} .= $_ }
		++$seen_body;
	 	undef $for_item;	
	    }
	    next;
	}

# If we have not come across the body of the description yet, then
	# the previous header needs to share the same description.
	if ($seen_body) {
	    @headers = ();
	}
	else {
	    push @headers, $header if defined $header;
	}

unless ( s/=item (.*?)\s*\z//) {

if ( s/=head1\sDESCRIPTION//) {
		$msg{$header = 'DESCRIPTION'} = '';
		undef $for_item;
	    }
	    elsif( s/^=for\s+diagnostics\s*\n(.*?)\s*\z// ) {
		$for_item = $1;
	    } 
	    next;
	}

if( $for_item ) { $header = $for_item; undef $for_item } 
	else {
	    $header = $1;
	    while( $header =~ /[;,]\z/ ) {
		<POD_DIAG> =~ /^\s*(.*?)\s*\z/;
		$header .= ' '.$1;
	    }
	}

# strip formatting directives from =item line
	$header =~ s/[A-Z]<(.*?)>/$1/g;

# Since we strip "\.\n" when we search a warning, strip it here as well
	$header =~ s/\.?$//;

my @toks = split( /(%l?[dxX]|%u|%c|%(?:\.\d+)?[fs])/, $header );
	if (@toks > 1) {
            my $conlen = 0;
            for my $i (0..$#toks){
                if( $i % 2 ){
                    if(      $toks[$i] eq '%c' ){
                        $toks[$i] = '.';
                    } elsif( $toks[$i] =~ /^%(?:d|u)$/ ){
                        $toks[$i] = '\d+';
                    } elsif( $toks[$i] =~ '^%(?:s|.*f)$' ){
                        $toks[$i] = $i == $#toks ? '.*' : '.*?';
                    } elsif( $toks[$i] =~ '%.(\d+)s' ){
                        $toks[$i] = ".{$1}";
                    } elsif( $toks[$i] =~ '^%l*([xX])$' ){
                        $toks[$i] = $1 eq 'x' ? '[\da-f]+' : '[\dA-F]+';
                    }
                } elsif( length( $toks[$i] ) ){
                    $toks[$i] = quotemeta $toks[$i];
                    $conlen += length( $toks[$i] );
                }
            }  
            my $lhs = join( '', @toks );
	    $transfmt{$header}{pat} =
              "    s{^$lhs}\n     {\Q$header\E}s\n\t&& return 1;\n";
            $transfmt{$header}{len} = $conlen;
	} else {
            $transfmt{$header}{pat} =
	      "    m{^\Q$header\E} && return 1;\n";
            $transfmt{$header}{len} = length( $header );
	}

print STDERR "$WHOAMI: Duplicate entry: \"$header\"\n"
	    if $msg{$header};

$msg{$header} = '';
	$seen_body = 0;
    }

close POD_DIAG unless *main::DATA eq *POD_DIAG;

die "No diagnostics?" unless %msg;

# Apply patterns in order of decreasing sum of lengths of fixed parts
    # Seems the best way of hitting the right one.
    for my $hdr ( sort { $transfmt{$b}{len} <=> $transfmt{$a}{len} }
                  keys %transfmt ){
        $transmo .= $transfmt{$hdr}{pat};
    }
    $transmo .= "    return 0;\n}\n";
    print STDERR $transmo if $DEBUG;
    eval $transmo;
    die $@ if $@;
}

if ($standalone) {
    if (!@ARGV and -t STDIN) { print STDERR "$0: Reading from STDIN\n" } 
    while (defined (my $error = <>)) {
	splainthis($error) || print THITHER $error;
    } 
    exit;
}

my $olddie;
my $oldwarn;

sub import {
    shift;
    $^W = 1; # yup, clobbered the global variable; 
	     # tough, if you want diags, you want diags.
    return if defined $SIG{__WARN__} && ($SIG{__WARN__} eq \&warn_trap);

for (@_) {

/^-d(ebug)?$/ 	   	&& do {
				    $DEBUG++;
				    next;
				   };

/^-v(erbose)?$/ 	&& do {
				    $VERBOSE++;
				    next;
				   };

/^-p(retty)?$/ 		&& do {
				    print STDERR "$0: I'm afraid it's too late for prettiness.\n";
				    $PRETTY++;
				    next;
			       };
	# matches trace and traceonly for legacy doc mixup reasons
	/^-t(race(only)?)?$/	&& do {
				    $TRACEONLY++;
				    next;
			       };
	/^-w(arntrace)?$/ 	&& do {
				    $WARNTRACE++;
				    next;
			       };

warn "Unknown flag: $_";
    }

$oldwarn = $SIG{__WARN__};
    $olddie = $SIG{__DIE__};
    $SIG{__WARN__} = \&warn_trap;
    $SIG{__DIE__} = \&death_trap;
}

sub enable { &import }

sub disable {
    shift;
    return unless $SIG{__WARN__} eq \&warn_trap;
    $SIG{__WARN__} = $oldwarn || '';
    $SIG{__DIE__} = $olddie || '';
}

sub warn_trap {
    my $warning = $_[0];
    if (caller eq $WHOAMI or !splainthis($warning)) {
	if ($WARNTRACE) {
	    print STDERR Carp::longmess($warning);
	} else {
	    print STDERR $warning;
	}
    } 
    goto &$oldwarn if defined $oldwarn and $oldwarn and $oldwarn ne \&warn_trap;
};

sub death_trap {
    my $exception = $_[0];

# See if we are coming from anywhere within an eval. If so we don't
    # want to explain the exception because it's going to get caught.
    my $in_eval = 0;
    my $i = 0;
    while (my $caller = (caller($i++))[3]) {
      if ($caller eq '(eval)') {
	$in_eval = 1;
	last;
      }
    }

splainthis($exception) unless $in_eval;
    if (caller eq $WHOAMI) { print STDERR "INTERNAL EXCEPTION: $exception"; } 
    &$olddie if defined $olddie and $olddie and $olddie ne \&death_trap;

return if $in_eval;

# We don't want to unset these if we're coming from an eval because
    # then we've turned off diagnostics.

# Switch off our die/warn handlers so we don't wind up in our own
    # traps.
    $SIG{__DIE__} = $SIG{__WARN__} = '';

$exception =~ s/\n(?=.)/\n\t/gas;

die Carp::longmess("__diagnostics__")
	  =~ s/^__diagnostics__.*?line \d+\.?\n/
		  "Uncaught exception from user code:\n\t$exception"
	      /re;
	# up we go; where we stop, nobody knows, but i think we die now
	# but i'm deeply afraid of the &$olddie guy reraising and us getting
	# into an indirect recursion loop
};

my %exact_duplicate;
my %old_diag;
my $count;
my $wantspace;
sub splainthis {
  return 0 if $TRACEONLY;
  for (my $tmp = shift) {
    local $\;
    local $!;
    ### &finish_compilation unless %msg;
    s/\.?\n+$//;
    my $orig = $_;
    # return unless defined;

# get rid of the where-are-we-in-input part
    s/, <.*?> (?:line|chunk).*$//;

# Discard 1st " at <file> line <no>" and all text beyond
    # but be aware of messages containing " at this-or-that"
    my $real = 0;
    my @secs = split( / at / );
    return unless @secs;
    $_ = $secs[0];
    for my $i ( 1..$#secs ){
        if( $secs[$i] =~ /.+? (?:line|chunk) \d+/ ){
            $real = 1;
            last;
        } else {
            $_ .= ' at ' . $secs[$i];
	}
    }
    
    # remove parenthesis occurring at the end of some messages 
    s/^$(.*)$$/$1/;

if ($exact_duplicate{$orig}++) {
	return &transmo;
    } else {
	return 0 unless &transmo;
    }

my $short = shorten($orig);
    if ($old_diag{$_}) {
	autodescribe();
	print THITHER "$short (#$old_diag{$_})\n";
	$wantspace = 1;
    } elsif (!$msg{$_} && $orig =~ /\n./s) {
	# A multiline message, like "Attempt to reload /
	# Compilation failed"
	my $found;
	for (split /^/, $orig) {
	    splainthis($_) and $found = 1;
	}
	return $found;
    } else {
	autodescribe();
	$old_diag{$_} = ++$count;
	print THITHER "\n" if $wantspace;
	$wantspace = 0;
	print THITHER "$short (#$old_diag{$_})\n";
	if ($msg{$_}) {
	    print THITHER $msg{$_};
	} else {
	    if (0 and $standalone) { 
		print THITHER "    **** Error #$old_diag{$_} ",
			($real ? "is" : "appears to be"),
			" an unknown diagnostic message.\n\n";
	    }
	    return 0;
	} 
    }
    return 1;
  }
}

sub autodescribe {
    if ($VERBOSE and not $count) {
	print THITHER &{$PRETTY ? \&bold : \&noop}("DESCRIPTION OF DIAGNOSTICS"),
		"\n$msg{DESCRIPTION}\n";
    } 
}

sub unescape { 
    s {
            E<  
            ( [A-Za-z]+ )       
            >   
    } { 
         do {   
             exists $HTML_Escapes{$1}
                ? do { $HTML_Escapes{$1} }
                : do {
                    warn "Unknown escape: E<$1> in $_";
                    "E<$1>";
                } 
         } 
    }egx;
}

sub shorten {
    my $line = $_[0];
    if (length($line) > 79 and index($line, "\n") == -1) {
	my $space_place = rindex($line, ' ', 79);
	if ($space_place != -1) {
	    substr($line, $space_place, 1) = "\n\t";
	} 
    } 
    return $line;
}

1 unless $standalone;  # or it'll complain about itself
__END__ # wish diag dbase were more accessible

[+] ..
[-] pyzor-migrate [edit]
[-] fgconsole [edit]
[-] nl [edit]
[-] pwd [edit]
[-] libnetcfg [edit]
[-] infokey [edit]
[-] true [edit]
[-] ps2ps [edit]
[-] traceroute [edit]
[-] atq [edit]
[-] truncate [edit]
[-] h2xs [edit]
[-] pyzor [edit]
[-] git-receive-pack [edit]
[-] grub2-mkpasswd-pbkdf2 [edit]
[-] renice [edit]
[-] js [edit]
[-] xxd [edit]
[-] dd [edit]
[-] ea-php56-pear [edit]
[-] nl-qdisc-add [edit]
[-] splain [edit]
[-] enchant [edit]
[-] zlib_decompress [edit]
[-] openal-info [edit]
[-] fold [edit]
[-] sftp [edit]
[-] setterm [edit]
[-] lchsh [edit]
[-] tcumttest [edit]
[-] nl-tctree-list [edit]
[-] db_archive [edit]
[-] awk [edit]
[-] mkinitrd [edit]
[-] gpgv2 [edit]
[-] nl-link-list [edit]
[-] pathchk [edit]
[-] ps2epsi [edit]
[-] loginctl [edit]
[-] netstat [edit]
[-] psfstriptable [edit]
[-] glib-genmarshal [edit]
[-] db_checkpoint [edit]
[-] ea-php74-pear [edit]
[-] slabinfo [edit]
[-] htpasswd [edit]
[-] bunzip2 [edit]
[-] systemd-cat [edit]
[-] systemd-sysv-convert [edit]
[-] lsscsi [edit]
[-] column [edit]
[-] clear [edit]
[-] instmodsh [edit]
[-] mcdiff [edit]
[-] dir [edit]
[-] seq [edit]
[-] systemd-ask-password [edit]
[-] xsetpointer [edit]
[-] c++filt [edit]
[-] jetcli [edit]
[-] node [edit]
[-] memcached-tool [edit]
[-] strings [edit]
[-] chcon [edit]
[-] dovecot-sysreport [edit]
[-] xmodmap [edit]
[-] krb5-config [edit]
[-] sg_readcap [edit]
[-] psfgettable [edit]
[-] tty [edit]
[-] zip [edit]
[-] jetapi [edit]
[-] unix-lpr.sh [edit]
[-] tchmttest [edit]
[-] strip [edit]
[-] aserver [edit]
[-] localedef [edit]
[-] look [edit]
[-] dracut [edit]
[-] systemd-notify [edit]
[-] dbus-uuidgen [edit]
[-] mysql_tzinfo_to_sql [edit]
[-] genl-ctrl-list [edit]
[-] ipcs [edit]
[-] db47_codegen [edit]
[-] xsetroot [edit]
[-] urlgrabber [edit]
[-] newuidmap [edit]
[-] xml2-config [edit]
[-] basename [edit]
[-] pod2man [edit]
[-] nl-link-enslave [edit]
[-] lz4_decompress [edit]
[-] bdftruncate [edit]
[-] newgrp [edit]
[-] systemd-analyze [edit]
[-] libpng-config [edit]
[-] diff3 [edit]
[-] sg_inq [edit]
[-] sprof [edit]
[-] gml2gv [edit]
[-] hexdump [edit]
[-] switch_mod_lsapi [edit]
[-] piconv [edit]
[-] lesspipe.sh [edit]
[-] taskset [edit]
[-] machinectl [edit]
[-] wmf2eps [edit]
[-] su [edit]
[-] view [edit]
[-] whois [edit]
[-] bdftogd [edit]
[-] locale [edit]
[-] npx [edit]
[-] sandbox [edit]
[-] cdda-player [edit]
[-] ipcrm [edit]
[-] preunzip [edit]
[-] pwscore [edit]
[-] ident [edit]
[-] dpkg-divert [edit]
[-] setmetamode [edit]
[-] mailx [edit]
[-] grub2-mkfont [edit]
[-] myisampack [edit]
[-] cpanp [edit]
[-] repotrack [edit]
[-] MagickCore-config [edit]
[-] gd2copypal [edit]
[-] printenv [edit]
[-] cifsiostat [edit]
[-] gtar [edit]
[-] perlbug [edit]
[-] glib-mkenums [edit]
[-] bashbug-64 [edit]
[-] sg_read_long [edit]
[-] mkfontdir [edit]
[-] dumpkeys [edit]
[-] ea-php72 [edit]
[-] ea-php70-pear [edit]
[-] ispell [edit]
[-] mysql_install_db [edit]
[-] dotty [edit]
[-] date [edit]
[-] rvi [edit]
[-] tracepath [edit]
[-] infotocap [edit]
[-] gs [edit]
[-] pstruct [edit]
[-] autotrace [edit]
[-] co [edit]
[-] MagickWand-config [edit]
[-] gpgsplit [edit]
[-] cpapi1 [edit]
[-] db_replicate [edit]
[-] aulast [edit]
[-] rm [edit]
[-] xzfgrep [edit]
[-] ps2pdf [edit]
[-] bc [edit]
[-] msgcat [edit]
[-] odbc_config [edit]
[-] sha256sum [edit]
[-] db47_deadlock [edit]
[-] autopoint [edit]
[-] gsettings [edit]
[-] zforce [edit]
[-] vimdot [edit]
[-] word-list-compress [edit]
[-] chmem [edit]
[-] mysqldumpslow [edit]
[-] tcptraceroute [edit]
[-] orc-bugreport [edit]
[-] sg_reset [edit]
[-] centrino-decode [edit]
[-] dbus-monitor [edit]
[-] wmf2svg [edit]
[-] gcov [edit]
[-] pldd [edit]
[-] ndiff [edit]
[-] watch [edit]
[-] sg_unmap [edit]
[-] nl-cls-list [edit]
[-] setleds [edit]
[-] mixartloader [edit]
[-] replace [edit]
[-] mysqlbinlog [edit]
[-] cxpm [edit]
[-] git-upload-pack [edit]
[-] python2 [edit]
[-] giftogd2 [edit]
[-] ea-php56-pecl [edit]
[-] auvirt [edit]
[-] rpmkeys [edit]
[-] stat [edit]
[-] bzcmp [edit]
[-] hb-ot-shape-closure [edit]
[-] cpupower [edit]
[-] h2ph [edit]
[-] kill [edit]
[-] prezip-bin [edit]
[-] gdbus-codegen [edit]
[-] nl-link-ifindex2name [edit]
[-] sg_dd [edit]
[-] nl-addr-delete [edit]
[-] git [edit]
[-] audit2why [edit]
[-] hostnamectl [edit]
[-] c2ph [edit]
[-] vxloader [edit]
[-] bzcat [edit]
[-] msgconv [edit]
[-] make [edit]
[-] db47_archive [edit]
[-] colrm [edit]
[-] zless [edit]
[-] glib-gettextize [edit]
[-] ea-php56 [edit]
[-] sleep [edit]
[-] xkill [edit]
[-] zipcloak [edit]
[-] jetapps [edit]
[-] repoquery [edit]
[-] imunify360-agent [edit]
[-] pfbtopfa [edit]
[-] nsupdate [edit]
[-] ssh-copy-id [edit]
[-] dbus-daemon [edit]
[-] nl-list-caches [edit]
[-] ea-php71-pear [edit]
[-] xinput [edit]
[-] secon [edit]
[-] dbus-send [edit]
[-] php [edit]
[-] sg_write_buffer [edit]
[-] pngtogd2 [edit]
[-] gcc-ranlib [edit]
[-] tac [edit]
[-] pk12util [edit]
[-] myisam_ftdump [edit]
[-] sed [edit]
[-] chacl [edit]
[-] fg [edit]
[-] inotifywait [edit]
[-] ccomps [edit]
[-] gv2gml [edit]
[-] yarn [edit]
[-] tchtest [edit]
[-] cairo-sphinx [edit]
[-] mount [edit]
[-] sg_raw [edit]
[-] db_dump [edit]
[-] HEAD [edit]
[-] tcamgr [edit]
[-] rlog [edit]
[-] gsf-office-thumbnailer [edit]
[-] echo [edit]
[-] gpg-error-config [edit]
[-] fipshmac [edit]
[-] troff [edit]
[-] ea-php74 [edit]
[-] tcatest [edit]
[-] pango-list [edit]
[-] myisamchk [edit]
[-] grub2-editenv [edit]
[-] lslogins [edit]
[-] scsi_logging_level [edit]
[-] atop [edit]
[-] rview [edit]
[-] xzcmp [edit]
[-] sg_verify [edit]
[-] gpg-agent [edit]
[-] find2perl [edit]
[-] cpio [edit]
[-] whatis [edit]
[-] bg [edit]
[-] gpgv [edit]
[-] dot2gxl [edit]
[-] ipcmk [edit]
[-] ifnames [edit]
[-] podchecker [edit]
[-] pod2html [edit]
[-] nm-online [edit]
[-] chmod [edit]
[-] colcrt [edit]
[-] yum-debug-dump [edit]
[-] getopts [edit]
[-] tcamttest [edit]
[-] git-upload-archive [edit]
[-] vlock [edit]
[-] gvgen [edit]
[-] db_tuner [edit]
[-] envsubst [edit]
[-] bison [edit]
[-] unxz [edit]
[-] openssl [edit]
[-] mkfifo [edit]
[-] sh [edit]
[-] linux64 [edit]
[-] pkcs1-conv [edit]
[-] tset [edit]
[-] pygettext.py [edit]
[-] ping6 [edit]
[-] gettext [edit]
[-] cal [edit]
[-] systemd-hwdb [edit]
[-] mkfontscale [edit]
[-] zegrep [edit]
[-] net-snmp-create-v3-user [edit]
[-] nano [edit]
[-] gcc [edit]
[-] lastb [edit]
[-] xzdiff [edit]
[-] lscpu [edit]
[-] unzip [edit]
[-] bzip2recover [edit]
[-] nohup [edit]
[-] yum-debug-restore [edit]
[-] ea-php73-pecl [edit]
[-] dbus-binding-tool [edit]
[-] ssh [edit]
[-] yum-config-manager [edit]
[-] showkey [edit]
[-] gneqn [edit]
[-] sccmap [edit]
[-] jobs [edit]
[-] sg_rbuf [edit]
[-] odbcinst [edit]
[-] xzcat [edit]
[-] h5perf_serial [edit]
[-] dig [edit]
[-] dwp [edit]
[-] cd [edit]
[-] rpmverify [edit]
[-] scsi_readcap [edit]
[-] post-grohtml [edit]
[-] sg_turs [edit]
[-] sg_emc_trespass [edit]
[-] ranlib [edit]
[-] funzip [edit]
[-] memcached [edit]
[-] teamdctl [edit]
[-] xzgrep [edit]
[-] cp [edit]
[-] gzexe [edit]
[-] compare [edit]
[-] gdk-pixbuf-csource [edit]
[-] msggrep [edit]
[-] findmnt [edit]
[-] ex [edit]
[-] sendiso [edit]
[-] last [edit]
[-] xstdcmap [edit]
[-] sort [edit]
[-] alias [edit]
[-] nl-fib-lookup [edit]
[-] namei [edit]
[-] unshare [edit]
[-] usleep [edit]
[-] gvmap [edit]
[-] ld.gold [edit]
[-] sasl2-sample-server [edit]
[-] nmtui [edit]
[-] grub2-kbdcomp [edit]
[-] nail [edit]
[-] dmesg [edit]
[-] checkmodule [edit]
[-] chrt [edit]
[-] rpm2cpio [edit]
[-] strace-log-merge [edit]
[-] gxl2dot [edit]
[-] trust [edit]
[-] h5debug [edit]
[-] mcookie [edit]
[-] ul [edit]
[-] gdtopng [edit]
[-] tcucodec [edit]
[-] db47_upgrade [edit]
[-] easy_install [edit]
[-] psfxtable [edit]
[-] libtool [edit]
[-] sum [edit]
[-] cat [edit]
[-] powernow-k8-decode [edit]
[-] turbostat [edit]
[-] pip-3 [edit]
[-] gdlib-config [edit]
[-] run-parts [edit]
[-] setfacl [edit]
[-] bzmore [edit]
[-] nslookup [edit]
[-] gvpr [edit]
[-] gobject-query [edit]
[-] elfedit [edit]
[-] sg_stpg [edit]
[-] gprof [edit]
[-] Mail [edit]
[-] grub2-mkimage [edit]
[-] od [edit]
[-] sudoreplay [edit]
[-] nl-link-release [edit]
[-] mknod [edit]
[-] pwdx [edit]
[-] pngtogd [edit]
[-] pr [edit]
[-] unlink [edit]
[-] whereis [edit]
[-] more [edit]
[-] imunify-service [edit]
[-] gslp [edit]
[-] sg_get_lba_status [edit]
[-] db47_dump [edit]
[-] peekfd [edit]
[-] doveconf [edit]
[-] nmcli [edit]
[-] getconf [edit]
[-] lastlog [edit]
[-] zcmp [edit]
[-] head [edit]
[-] mandb [edit]
[-] my_print_defaults [edit]
[-] sfdp [edit]
[-] users [edit]
[-] msghack [edit]
[-] xzegrep [edit]
[-] imapsync [edit]
[-] msgcomm [edit]
[-] grub2-render-label [edit]
[-] fc-cache [edit]
[-] pynche [edit]
[-] nl-neigh-add [edit]
[-] gtbl [edit]
[-] mkdir [edit]
[-] dbilogstrip [edit]
[-] tsort [edit]
[-] db47_printlog [edit]
[-] fc-pattern [edit]
[-] ssh-add [edit]
[-] icu-config [edit]
[-] fallocate [edit]
[-] false [edit]
[-] xzdec [edit]
[-] gd2togif [edit]
[-] tmux [edit]
[-] hunspell [edit]
[-] make-dummy-cert [edit]
[-] h5jam [edit]
[-] sexp-conv [edit]
[-] bzdiff [edit]
[-] loadunimap [edit]
[-] perl5.16.3 [edit]
[-] nf-ct-list [edit]
[-] bashbug [edit]
[-] mail [edit]
[-] dbiproxy [edit]
[-] nl-class-delete [edit]
[-] ypdomainname [edit]
[-] fc-conflist [edit]
[-] nf-queue [edit]
[-] pure-pwconvert [edit]
[-] wmf2fig [edit]
[-] gapplication [edit]
[-] cpanp-run-perl [edit]
[-] diff [edit]
[-] cc [edit]
[-] zfgrep [edit]
[-] sg_copy_results [edit]
[-] gr2fonttest [edit]
[-] checkpolicy [edit]
[-] db_hotbackup [edit]
[-] batch [edit]
[-] ps2pdf14 [edit]
[-] touch [edit]
[-] tcfmttest [edit]
[-] mysqladmin [edit]
[-] setfont [edit]
[-] pydoc3 [edit]
[-] mysql_plugin [edit]
[-] wall [edit]
[-] fc-list [edit]
[-] db47_recover [edit]
[-] md5sum [edit]
[-] pstree.x11 [edit]
[-] systemd-delta [edit]
[-] dbus-cleanup-sockets [edit]
[-] soelim [edit]
[-] nl-util-addr [edit]
[-] hdsploader [edit]
[-] montage [edit]
[-] sg_vpd [edit]
[-] catman [edit]
[-] unflatten [edit]
[-] tail [edit]
[-] nl-class-add [edit]
[-] tcbmttest [edit]
[-] which [edit]
[-] msgunfmt [edit]
[-] ps2pdfwr [edit]
[-] libgcrypt-config [edit]
[-] pkaction [edit]
[-] sg_map [edit]
[-] comm [edit]
[-] g++ [edit]
[-] autoupdate [edit]
[-] tput [edit]
[-] sim_client [edit]
[-] firewall-cmd [edit]
[-] mktemp [edit]
[-] sha224sum [edit]
[-] sgm_dd [edit]
[-] libwmf-fontmap [edit]
[-] tload [edit]
[-] mv [edit]
[-] msgen [edit]
[-] pkla-check-authorization [edit]
[-] elinks [edit]
[-] lwp-request [edit]
[-] qt-faststart [edit]
[-] autotrace-config [edit]
[-] mapscrn [edit]
[-] crontab [edit]
[-] sg_requests [edit]
[-] sg_write_long [edit]
[-] vimdiff [edit]
[-] nproc [edit]
[-] scl_source [edit]
[-] audit2allow [edit]
[-] xzmore [edit]
[-] mm2gv [edit]
[-] libpng15-config [edit]
[-] lwp-download [edit]
[-] pgawk [edit]
[-] nroff [edit]
[-] lsattr [edit]
[-] ffprobe [edit]
[-] gawk [edit]
[-] xz [edit]
[-] nsenter [edit]
[-] sg_test_rwbuf [edit]
[-] atopsar [edit]
[-] ssh-keyscan [edit]
[-] systemd-path [edit]
[-] atrm [edit]
[-] tclsh8.5 [edit]
[-] readelf [edit]
[-] gsdj [edit]
[-] tabs [edit]
[-] mysqldump [edit]
[-] fc-cache-64 [edit]
[-] snmpconf [edit]
[-] pcre-config [edit]
[-] pip-3.6 [edit]
[-] wait [edit]
[-] timeout [edit]
[-] lessecho [edit]
[-] dvipdf [edit]
[-] nl-link-stats [edit]
[-] httxt2dbm [edit]
[-] json_xs [edit]
[-] gsbj [edit]
[-] base64 [edit]
[-] ci [edit]
[-] cd-read [edit]
[-] cvtsudoers [edit]
[-] ldd [edit]
[-] paperconf [edit]
[-] unshar [edit]
[-] perlml [edit]
[-] cl-linksafe-reconfigure [edit]
[-] pinky [edit]
[-] idle [edit]
[-] firewall-offline-cmd [edit]
[-] cd-paranoia [edit]
[-] snice [edit]
[-] flex [edit]
[-] h5import [edit]
[-] fc-query [edit]
[-] autoconf [edit]
[-] logresolve [edit]
[-] alt-mysql-reconfigure [edit]
[-] nl-neigh-delete [edit]
[-] pf2afm [edit]
[-] imunify-antivirus [edit]
[-] ea-wappspector [edit]
[-] gpg2 [edit]
[-] wmf2gd [edit]
[-] setpriv [edit]
[-] dijkstra [edit]
[-] xsubpp [edit]
[-] tred [edit]
[-] ngettext [edit]
[-] mysqlimport [edit]
[-] uapi [edit]
[-] mysql [edit]
[-] nl-addr-add [edit]
[-] groups [edit]
[-] grub2-script-check [edit]
[-] grub2-fstest [edit]
[-] xrdb [edit]
[-] gpg [edit]
[-] scsi_temperature [edit]
[-] iconv [edit]
[-] domainname [edit]
[-] corelist [edit]
[-] numfmt [edit]
[-] aspell [edit]
[-] lslocks [edit]
[-] setkeycodes [edit]
[-] sg_reassign [edit]
[-] cd-info [edit]
[-] pinentry [edit]
[-] systemd-inhibit [edit]
[-] autom4te [edit]
[-] jetmongo [edit]
[-] nfsiostat-sysstat [edit]
[-] patch [edit]
[-] systemd-loginctl [edit]
[-] imunify-agent-proxy [edit]
[-] whoami [edit]
[-] msgcmp [edit]
[-] pkttyagent [edit]
[-] m4 [edit]
[-] csslint-0.6 [edit]
[-] raw [edit]
[-] cpp [edit]
[-] grub2-mknetdir [edit]
[-] sudoedit [edit]
[-] link [edit]
[-] cpan-mirrors [edit]
[-] repo-graph [edit]
[-] perlivp [edit]
[-] pdf2ps [edit]
[-] chattr [edit]
[-] repoclosure [edit]
[-] GET [edit]
[-] dtrace [edit]
[-] cksum [edit]
[-] gcc-ar [edit]
[-] gettextize [edit]
[-] scl_enabled [edit]
[-] quota [edit]
[-] shred [edit]
[-] sg_ident [edit]
[-] import [edit]
[-] lynx [edit]
[-] wish8.5 [edit]
[-] reposync [edit]
[-] expr [edit]
[-] prtstat [edit]
[-] ptaskset [edit]
[-] at [edit]
[-] resolve_stack_dump [edit]
[-] nmtui-hostname [edit]
[-] tbl [edit]
[-] gdk-pixbuf-pixdata [edit]
[-] mysqlcheck [edit]
[-] ca-legacy [edit]
[-] mysql_ssl_rsa_setup [edit]
[-] alt-php-mysql-reconfigure.py [edit]
[-] luac [edit]
[-] autoscan [edit]
[-] systemd-firstboot [edit]
[-] nl-neigh-list [edit]
[-] zipdetails [edit]
[-] update-mime-database [edit]
[-] scriptreplay [edit]
[-] xsetmode [edit]
[-] sudo [edit]
[-] pphs [edit]
[-] unzipsfx [edit]
[-] x86_energy_perf_policy [edit]
[-] fdp [edit]
[-] whois.md [edit]
[-] pod2text [edit]
[-] glib-compile-schemas [edit]
[-] chsh [edit]
[-] tcbtest [edit]
[-] h5repack [edit]
[-] xgettext [edit]
[-] chage [edit]
[-] pmap [edit]
[-] socat [edit]
[-] sg_xcopy [edit]
[-] teamd [edit]
[-] pod2latex [edit]
[-] c99 [edit]
[-] bind9-config [edit]
[-] bzip2 [edit]
[-] zipnote [edit]
[-] paste [edit]
[-] ausyscall [edit]
[-] signver [edit]
[-] sg_get_config [edit]
[-] podselect [edit]
[-] ping [edit]
[-] arpaname [edit]
[-] getkeycodes [edit]
[-] bond2team [edit]
[-] x86_64 [edit]
[-] tapestat [edit]
[-] wmf2x [edit]
[-] xslt-config [edit]
[-] composite [edit]
[-] ptar [edit]
[-] xgamma [edit]
[-] display [edit]
[-] pkg-config [edit]
[-] join [edit]
[-] sg_read_buffer [edit]
[-] host [edit]
[-] vi [edit]
[-] x86_64-redhat-linux-g++ [edit]
[-] isql [edit]
[-] neato [edit]
[-] htop [edit]
[-] pyvenv-3.6 [edit]
[-] db_verify [edit]
[-] delv [edit]
[-] ls [edit]
[-] agentxtrap [edit]
[-] uptime [edit]
[-] c++ [edit]
[-] circo [edit]
[-] gslj [edit]
[-] readlink [edit]
[-] filan [edit]
[-] gc [edit]
[-] rpcgen [edit]
[-] h5ls [edit]
[-] as [edit]
[-] zipcmp [edit]
[-] nf-exp-list [edit]
[-] pidstat [edit]
[-] twopi [edit]
[-] linux-boot-prober [edit]
[-] yes [edit]
[-] igawk [edit]
[-] vmstat [edit]
[-] json_reformat [edit]
[-] pydoc3.6 [edit]
[-] run-with-aspell [edit]
[-] i386 [edit]
[-] makedb [edit]
[-] setarch [edit]
[-] prlimit [edit]
[-] unexpand [edit]
[-] s2p [edit]
[-] mysql_config [edit]
[-] dirname [edit]
[-] objdump [edit]
[-] gtester [edit]
[-] atopconvert [edit]
[-] tcttest [edit]
[-] db_recover [edit]
[-] sg_sync [edit]
[-] pango-querymodules-64 [edit]
[-] dpkg-trigger [edit]
[-] aulastlog [edit]
[-] sha512sum [edit]
[-] uname [edit]
[-] kdumpctl [edit]
[-] loadkeys [edit]
[-] chfn [edit]
[-] nping [edit]
[-] ab [edit]
[-] neqn [edit]
[-] h5copy [edit]
[-] sync [edit]
[-] matdump [edit]
[-] dgawk [edit]
[-] killall [edit]
[-] imunify360-command-wrapper [edit]
[-] gtk-demo [edit]
[-] nmtui-edit [edit]
[-] sg_luns [edit]
[-] page_owner_sort [edit]
[-] manpath [edit]
[-] cpapi2 [edit]
[-] mysql_upgrade [edit]
[-] nl-pktloc-lookup [edit]
[-] links [edit]
[-] pinentry-curses [edit]
[-] dnsdomainname [edit]
[-] plesk_configure [edit]
[-] sg_start [edit]
[-] dpkg-deb [edit]
[-] sg_map26 [edit]
[-] xrefresh [edit]
[-] alt-php-mysql-reconfigure [edit]
[-] pyzord [edit]
[-] innochecksum [edit]
[-] h5dump [edit]
[-] glib-compile-resources [edit]
[-] ea-php70-pecl [edit]
[-] mesg [edit]
[-] ziptorrent [edit]
[-] lsns [edit]
[-] sg_rmsn [edit]
[-] setup-nsssysinit.sh [edit]
[-] pdns_control [edit]
[-] gunzip [edit]
[-] verifytree [edit]
[-] xmlcatalog [edit]
[-] testgdbm [edit]
[-] mmc-tool [edit]
[-] grub2-mklayout [edit]
[-] mysql_config_editor [edit]
[-] hb-shape [edit]
[-] db_load [edit]
[-] pydoc [edit]
[-] mysql_config-64 [edit]
[-] gpic [edit]
[-] shuf [edit]
[-] pip3 [edit]
[-] nl-qdisc-delete [edit]
[-] gtester-report [edit]
[-] ea-php73-pear [edit]
[-] precat [edit]
[-] nl-cls-add [edit]
[-] ghostscript [edit]
[-] printf [edit]
[-] nf-monitor [edit]
[-] atopd [edit]
[-] sg_read_block_limits [edit]
[-] grub2-mkrescue [edit]
[-] sg_format [edit]
[-] acyclic [edit]
[-] pdf2dsc [edit]
[-] certutil [edit]
[-] msgexec [edit]
[-] col [edit]
[-] sgp_dd [edit]
[-] objcopy [edit]
[-] grub2-glue-efi [edit]
[-] bcomps [edit]
[-] sg_safte [edit]
[-] ncurses5-config [edit]
[-] x86_64-redhat-linux-gcc [edit]
[-] sg [edit]
[-] chgrp [edit]
[-] expand [edit]
[-] tctmttest [edit]
[-] nmap [edit]
[-] sg_sat_phy_event [edit]
[-] dot [edit]
[-] toe [edit]
[-] scsi-rescan [edit]
[-] iptables-xml [edit]
[-] realpath [edit]
[-] ea-php74-pecl [edit]
[-] nl-list-sockets [edit]
[-] perror [edit]
[-] ptx [edit]
[-] compile_et [edit]
[-] ps2ascii [edit]
[-] nc [edit]
[-] nl-route-get [edit]
[-] fipscheck [edit]
[-] bzless [edit]
[-] who [edit]
[-] dbiprof [edit]
[-] scsi_stop [edit]
[-] nl-link-set [edit]
[-] showrgb [edit]
[-] sg_persist [edit]
[-] db_stat [edit]
[-] nl-monitor [edit]
[-] dbus-run-session [edit]
[-] update-ca-trust [edit]
[-] eps2eps [edit]
[-] wget [edit]
[-] setup-nsssysinit [edit]
[-] nl-addr-list [edit]
[-] sg_compare_and_write [edit]
[-] needs-restarting [edit]
[-] gdparttopng [edit]
[-] sessreg [edit]
[-] scsi_mandat [edit]
[-] a2p [edit]
[-] json_verify [edit]
[-] heif-thumbnailer [edit]
[-] nss-policy-check [edit]
[-] prezip [edit]
[-] enchant-lsmod [edit]
[-] mogrify [edit]
[-] gtk-builder-convert [edit]
[-] diffimg [edit]
[-] flock [edit]
[-] libwmf-config [edit]
[-] zipgrep [edit]
[-] idiag-socket-details [edit]
[-] fc-validate [edit]
[-] vim [edit]
[-] gvmap.sh [edit]
[-] unicode_start [edit]
[-] mcedit [edit]
[-] unalias [edit]
[-] pkill [edit]
[-] nm [edit]
[-] geoipupdate [edit]
[-] automake-1.13 [edit]
[-] os-prober [edit]
[-] nisdomainname [edit]
[-] nmtui-connect [edit]
[-] convert [edit]
[-] sg_rdac [edit]
[-] uniq [edit]
[-] yumdownloader [edit]
[-] mc [edit]
[-] POST [edit]
[-] split [edit]
[-] python2-config [edit]
[-] grops [edit]
[-] systemd-escape [edit]
[-] icuinfo [edit]
[-] config_data [edit]
[-] sg_wr_mode [edit]
[-] wc [edit]
[-] identify [edit]
[-] python3.6m [edit]
[-] plymouth [edit]
[-] mpstat [edit]
[-] scsi_start [edit]
[-] Wand-config [edit]
[-] open [edit]
[-] tic [edit]
[-] sg_write_same [edit]
[-] npm [edit]
[-] grub2-syslinux2cfg [edit]
[-] isc-config.sh [edit]
[-] ncursesw5-config [edit]
[-] lneato [edit]
[-] sg_modes [edit]
[-] sha1sum [edit]
[-] dltest [edit]
[-] unlz4 [edit]
[-] cmp [edit]
[-] pstree [edit]
[-] 2to3 [edit]
[-] pure-statsdecode [edit]
[-] gpg-zip [edit]
[-] h5stat [edit]
[-] kernel-install [edit]
[-] geoiplookup6 [edit]
[-] sg_logs [edit]
[-] tailf [edit]
[-] systemd-machine-id-setup [edit]
[-] chardetect [edit]
[-] umount [edit]
[-] rvim [edit]
[-] iostat [edit]
[-] yarnpkg [edit]
[-] geqn [edit]
[-] python3.6 [edit]
[-] h5mkgrp [edit]
[-] tcfmgr [edit]
[-] ps [edit]
[-] yum [edit]
[-] uuclient [edit]
[-] pchrt [edit]
[-] zdiff [edit]
[-] easy_install-2.7 [edit]
[-] kbdrate [edit]
[-] groff [edit]
[-] sg_sanitize [edit]
[-] ffserver [edit]
[-] systemd-tmpfiles [edit]
[-] gtk-query-immodules-2.0-64 [edit]
[-] gvcolor [edit]
[-] gpgparsemail [edit]
[-] sg_referrals [edit]
[-] gio [edit]
[-] reset [edit]
[-] write [edit]
[-] scl [edit]
[-] ndptool [edit]
[-] ucs2any [edit]
[-] gdk-pixbuf-query-loaders-64 [edit]
[-] ea-php70 [edit]
[-] lz4cat [edit]
[-] c89 [edit]
[-] mdig [edit]
[-] openvt [edit]
[-] wish [edit]
[-] dpkg-split [edit]
[-] h5diff [edit]
[-] sedismod [edit]
[-] qemu-ga [edit]
[-] ftp [edit]
[-] heif-info [edit]
[-] aec [edit]
[-] lwp-dump [edit]
[-] mysqlpump [edit]
[-] gettext.sh [edit]
[-] oldfind [edit]
[-] lsipc [edit]
[-] gif2h5 [edit]
[-] gdk-pixbuf-thumbnailer [edit]
[-] nop [edit]
[-] zipinfo [edit]
[-] mysql_secure_installation [edit]
[-] install [edit]
[-] watchgnupg [edit]
[-] factor [edit]
[-] hostid [edit]
[-] getopt [edit]
[-] h52gif [edit]
[-] busctl [edit]
[-] info [edit]
[-] libtoolize [edit]
[-] stdbuf [edit]
[-] systemd-coredumpctl [edit]
[-] nf-exp-delete [edit]
[-] newgidmap [edit]
[-] strace [edit]
[-] db_dump185 [edit]
[-] systemctl [edit]
[-] id [edit]
[-] sg_ses [edit]
[-] grub2-menulst2cfg [edit]
[-] xmllint [edit]
[-] graphml2gv [edit]
[-] uuidgen [edit]
[-] update-gtk-immodules [edit]
[-] pre-grohtml [edit]
[-] sg_scan [edit]
[-] tmpwatch [edit]
[-] ncat [edit]
[-] dircolors [edit]
[-] zipmerge [edit]
[-] freetype-config [edit]
[-] gsoelim [edit]
[-] gio-querymodules-64 [edit]
[-] recode-sr-latin [edit]
[-] setvtrgb [edit]
[-] top [edit]
[-] rpm [edit]
[-] scp [edit]
[-] lesskey [edit]
[-] rdate [edit]
[-] sxpm [edit]
[-] keyctl [edit]
[-] fonttosfnt [edit]
[-] prune [edit]
[-] lwp-mirror [edit]
[-] mcview [edit]
[-] chvt [edit]
[-] ptargrep [edit]
[-] pflags [edit]
[-] nl-link-name2ifindex [edit]
[-] sar [edit]
[-] pod2usage [edit]
[-] semodule_package [edit]
[-] cpapi3 [edit]
[-] grub2-file [edit]
[-] cmsutil [edit]
[-] git-shell [edit]
[-] nettle-lfib-stream [edit]
[-] gpg-error [edit]
[-] gcc-nm [edit]
[-] rpmquery [edit]
[-] linux32 [edit]
[-] systemd-tty-ask-password-agent [edit]
[-] nl-rule-list [edit]
[-] scsi_satl [edit]
[-] pftp [edit]
[-] hostname [edit]
[-] doveadm [edit]
[-] vimtutor [edit]
[-] sg_decode_sense [edit]
[-] nf-log [edit]
[-] ea-php72-pecl [edit]
[-] python2.7 [edit]
[-] systemd-run [edit]
[-] grub2-mkrelpath [edit]
[-] captoinfo [edit]
[-] deallocvt [edit]
[-] x265 [edit]
[-] idn [edit]
[-] skill [edit]
[-] nl-route-delete [edit]
[-] gpgconf [edit]
[-] grep [edit]
[-] isosize [edit]
[-] udevadm [edit]
[-] rcsmerge [edit]
[-] python-config [edit]
[-] curl [edit]
[-] nf-exp-add [edit]
[-] tee [edit]
[-] aclocal-1.13 [edit]
[-] yum-builddep [edit]
[-] timedatectl [edit]
[-] less [edit]
[-] cpan [edit]
[-] dpkg [edit]
[-] gsdj500 [edit]
[-] fc [edit]
[-] ld.bfd [edit]
[-] fribidi [edit]
[-] rcs [edit]
[-] infocmp [edit]
[-] wdctl [edit]
[-] db47_stat [edit]
[-] ionice [edit]
[-] zone2sql [edit]
[-] systemd-nspawn [edit]
[-] msgfmt.py [edit]
[-] mysqlslap [edit]
[-] db47_checkpoint [edit]
[-] addr2line [edit]
[-] gmake [edit]
[-] htdigest [edit]
[-] showconsolefont [edit]
[-] preconv [edit]
[-] nl-route-list [edit]
[-] nl-qdisc-list [edit]
[-] prove [edit]
[-] df [edit]
[-] jetbackup [edit]
[-] journalctl [edit]
[-] logger [edit]
[-] pkla-admin-identities [edit]
[-] rnano [edit]
[-] perlthanks [edit]
[-] berkeley_db47_svc [edit]
[-] ea-php73 [edit]
[-] pwmake [edit]
[-] slogin [edit]
[-] gvpack [edit]
[-] Magick-config [edit]
[-] rsync [edit]
[-] rsyslog-recover-qi.pl [edit]
[-] gdbus [edit]
[-] csplit [edit]
[-] pic [edit]
[-] arch [edit]
[-] pip [edit]
[-] msgattrib [edit]
[-] iso-info [edit]
[-] bzgrep [edit]
[-] repo-rss [edit]
[-] tcbmgr [edit]
[-] find [edit]
[-] apropos [edit]
[-] ea-php71-pecl [edit]
[-] apxs [edit]
[-] python3 [edit]
[-] fc-cat [edit]
[-] perl [edit]
[-] ptardiff [edit]
[-] testlibraw [edit]
[-] h5repart [edit]
[-] grotty [edit]
[-] lsmem [edit]
[-] cluster [edit]
[-] systemd-cgls [edit]
[-] msgmerge [edit]
[-] sginfo [edit]
[-] file [edit]
[-] unicode_stop [edit]
[-] procan [edit]
[-] dpkg-maintscript-helper [edit]
[-] sasl2-sample-client [edit]
[-] kmod [edit]
[-] heif-convert [edit]
[-] gtroff [edit]
[-] [ [edit]
[-] hmac256 [edit]
[-] dwz [edit]
[-] patchwork [edit]
[-] h5unjam [edit]
[-] nl-route-add [edit]
[-] ps2ps2 [edit]
[-] sg_sat_identify [edit]
[-] nl-class-list [edit]
[-] pl2pm [edit]
[-] msginit [edit]
[-] sg_opcodes [edit]
[-] setsid [edit]
[-] gm [edit]
[-] telnet [edit]
[-] mountpoint [edit]
[-] webpng [edit]
[-] annotate [edit]
[-] slabtop [edit]
[-] lz4 [edit]
[-] utmpdump [edit]
[-] gencat [edit]
[-] zipsplit [edit]
[-] uudecode [edit]
[-] db47_hotbackup [edit]
[-] tctmgr [edit]
[-] rpmdb [edit]
[-] fgrep [edit]
[-] nl-classid-lookup [edit]
[-] ipcalc [edit]
[-] show-installed [edit]
[-] sedispol [edit]
[-] stty [edit]
[-] pip2 [edit]
[-] repomanage [edit]
[-] db_upgrade [edit]
[-] resolveip [edit]
[-] sg_sat_set_features [edit]
[-] icu-config-64 [edit]
[-] grub2-mkstandalone [edit]
[-] systemd-detect-virt [edit]
[-] debuginfo-install [edit]
[-] cpan2dist [edit]
[-] python [edit]
[-] pango-view [edit]
[-] crlutil [edit]
[-] fc-scan [edit]
[-] w [edit]
[-] rmdir [edit]
[-] stream [edit]
[-] quotasync [edit]
[-] xhost [edit]
[-] myisamlog [edit]
[-] msguniq [edit]
[-] zone2json [edit]
[-] whiptail [edit]
[-] getent [edit]
[-] dpkg-statoverride [edit]
[-] db_deadlock [edit]
[-] scsi_ready [edit]
[-] sg_rtpg [edit]
[-] pyvenv [edit]
[-] bdftopcf [edit]
[-] ar [edit]
[-] msgfilter [edit]
[-] passwd [edit]
[-] spell [edit]
[-] sadf [edit]
[-] bootctl [edit]
[-] ln [edit]
[-] cut [edit]
[-] ea-php71 [edit]
[-] catchsegv [edit]
[-] gpasswd [edit]
[-] nl-neightbl-list [edit]
[-] env [edit]
[-] named-rrchecker [edit]
[-] dumpiso [edit]
[-] getfacl [edit]
[-] easy_install-3.6 [edit]
[-] smtpd.py [edit]
[-] egrep [edit]
[-] perldoc [edit]
[-] shasum [edit]
[-] db47_load [edit]
[-] localectl [edit]
[-] ssh-agent [edit]
[-] dsync [edit]
[-] lexgrog [edit]
[-] db_printlog [edit]
[-] uuencode [edit]
[-] psfaddtable [edit]
[-] flex++ [edit]
[-] pkcheck [edit]
[-] automake [edit]
[-] tzselect [edit]
[-] traceroute6 [edit]
[-] ps2pdf13 [edit]
[-] lz4c [edit]
[-] nettle-hash [edit]
[-] sg_senddiag [edit]
[-] kbd_mode [edit]
[-] chown [edit]
[-] pure-pw [edit]
[-] ffplay [edit]
[-] xset [edit]
[-] iso-read [edit]
[-] sg_prevent [edit]
[-] dbus-test-tool [edit]
[-] screen [edit]
[-] ssltap [edit]
[-] package-cleanup [edit]
[-] tchmgr [edit]
[-] command [edit]
[-] bash [edit]
[-] gtk-update-icon-cache [edit]
[-] iusql [edit]
[-] repodiff [edit]
[-] systemd-stdio-bridge [edit]
[-] size [edit]
[-] sqlite3 [edit]
[-] find-repos-of-install [edit]
[-] msgfmt [edit]
[-] fmt [edit]
[-] sg_read [edit]
[-] x86_64-redhat-linux-c++ [edit]
[-] gd2topng [edit]
[-] script [edit]
[-] coredumpctl [edit]
[-] cd-drive [edit]
[-] systemd-cgtop [edit]
[-] aclocal [edit]
[-] man [edit]
[-] ssh-keygen [edit]
[-] python2.7-config [edit]
[-] jetbackupapi [edit]
[-] p11-kit [edit]
[-] gnroff [edit]
[-] Magick++-config [edit]
[-] rev [edit]
[-] rcsdiff [edit]
[-] tracepath6 [edit]
[-] nice [edit]
[-] heif-enc [edit]
[-] lex [edit]
[-] lsinitrd [edit]
[-] xrandr [edit]
[-] tr [edit]
[-] xsltproc [edit]
[-] imunify-fgw-dump [edit]
[-] lprsetup.sh [edit]
[-] logname [edit]
[-] db47_verify [edit]
[-] animate [edit]
[-] show-changed-rco [edit]
[-] sdiff [edit]
[-] gdcmpgif [edit]
[-] teamnl [edit]
[-] dumpsexp [edit]
[-] geoiplookup [edit]
[-] zcat [edit]
[-] modutil [edit]
[-] gresource [edit]
[-] xorg-x11-fonts-update-dirs [edit]
[-] test [edit]
[-] pip2.7 [edit]
[-] lefty [edit]
[-] free [edit]
[-] eject [edit]
[-] ea-php72-pear [edit]
[-] mysqld_pre_systemd [edit]
[-] zgrep [edit]
[-] autoheader [edit]
[-] zmore [edit]
[-] du [edit]
[-] lchfn [edit]
[-] xzless [edit]
[-] tclsh [edit]
[-] nl-cls-delete [edit]
[-] gss-client [edit]
[-] lua [edit]
[-] tcftest [edit]
[-] read [edit]
[-] renew-dummy-cert [edit]
[-] nf-ct-add [edit]
[-] tar [edit]
[-] inotifywatch [edit]
[-] iceauth [edit]
[-] tcutest [edit]
[-] osage [edit]
[-] dbus-update-activation-environment [edit]
[-] autoreconf [edit]
[-] openssl11 [edit]
[-] json_pp [edit]
[-] sw-engine [edit]
[-] fc-match [edit]
[-] conjure [edit]
[-] chcat [edit]
[-] lsblk [edit]
[-] resizecons [edit]
[-] im360-k8s-syncer [edit]
[-] runcon [edit]
[-] sotruss [edit]
[-] shar [edit]
[-] dpkg-query [edit]
[-] rcsclean [edit]
[-] pdnsutil [edit]
[-] dc [edit]
[-] vdir [edit]
[-] merge [edit]
[-] pip3.6 [edit]
[-] znew [edit]
[-] rename [edit]
[-] sha384sum [edit]
[-] gxl2gv [edit]
[-] gzip [edit]
[-] eqn [edit]
[-] db_log_verify [edit]
[-] login [edit]
[-] gv2gxl [edit]
[-] ffmpeg [edit]
[-] mysqlshow [edit]
[-] usx2yloader [edit]
[-] gpg-connect-agent [edit]
[-] printafm [edit]
[-] htdbm [edit]
[-] hb-view [edit]
[-] umask [edit]
[-] rcsfreeze [edit]
[-] lsphp [edit]
[-] kbdinfo [edit]
[-] ps2pdf12 [edit]
[-] pgrep [edit]
[-] pkexec [edit]
[-] ld [edit]
[-] rescan-scsi-bus.sh [edit]
[-] gsnd [edit]
[-] zsoelim [edit]
[-] xmlwf [edit]
[-] xargs [edit]
[-] psed [edit]
[-] yum-groups-manager [edit]
[-] tmon [edit]